PrettyCranium Posted November 27, 2011 I'm hoping to get a chance to try this dress this week. One question: did you make a channel for the elastic to run through, or sew it directly to the fabric? I usually like to run my elastic through a channel, so I might have to add some fabric allowance if you did it the other way. Share this post Link to post Share on other sites
jadepixel Posted November 29, 2011 I did a fold-over channel for this one, there's room for it in the pattern if the elastic is small. Although, you could just sew on top of the elastic when you are hemming, if you stretch it at the same time as you stitch. jadepixel doll lab jadepixel eye shop Share this post Link to post Share on other sites
PrettyCranium Posted December 19, 2011 Okay, so I did a little work on the blouse of this pattern this weekend. I learned a very important lesson: it's harder than I thought! I think my white fabric is too thin, good for a lining but not heavy enough for a shirt. I also think my perfectionistic tendencies are getting me down. For example, I thought that I did not cut the pattern out neatly enough. I wasn't sure how to scrunch the bust part into line with the top of the shirt so that it scrunched evenly. Also, why do the back side edges look different than the front side edges? Do you just sew them so they fit? Am I waaaaay overthinking this? I will be trying again with some of the lessons I learned from the first go. I think ironing my seams and hems will make a difference too. I might try doubling up the fabric or just make a thin blouse as practice. In any case, I have no real sewing lessons, just a sewing machine and the will to succeed, so I will make another go of it. Share this post Link to post Share on other sites
jadepixel Posted December 21, 2011 I know my instructions are pretty vague, but Fenrir just put up a very nice walkthrough To get even gathers, you can mark the middle of the piece before you gather it, and then make sure that both halves are the same length once it's gathered. Also I learned after making this pattern that you can sew two lines of stitches for gathers, which will help keep them straight. As for the sides, they are a bit tricky to match up, but it creates a nice curve that follows the DD figure. You'll have to do similar maneuvers to sew fitted bust and hip parts, it just takes practice. As long as the fabric stays flat along the bit that's being sewn, it works out in the end. Lots of pins can help jadepixel doll lab jadepixel eye shop Share this post Link to post Share on other sites
PrettyCranium Posted December 22, 2011 Thanks! I will try again soon. Did you use elastic at the top and bottom of the bust like fenrir did, or just at the top and gather the bottom? Share this post Link to post Share on other sites
jadepixel Posted December 22, 2011 I only used elastic on the top. I stretched the elastic and stitched over it for one version, and that resulted in some pretty even gathering although it's a little tricky. jadepixel doll lab jadepixel eye shop Share this post Link to post Share on other sites
fenrir z78 Posted December 23, 2011 Seeing how that part of the outfit is one of the bigger problems . Ill show what Jadepixel is talking about. Give me a little time to get it ready. Share this post Link to post Share on other sites
fenrir z78 Posted December 23, 2011 It took me a little long then I was thinking. Ok if you made it this far then you must be doing somthing right. I broke this down to make it as simlpe a I could. I know how it is when your told how and it just does not want to work. Hope this helps. Ok here is the part labled "Blouse Bust" I fold it in half long ways. ( bad to bad side) I did not make the edges touch. It is about 1/4 of an inch of an offset.( you want the longer side on top ) Ok just so I dont blow any ones mind I am goning to us 2 deffrent colors of thread. blue is the bobbin and red is on the spool. Now that I got that out the way. Here is the elastic band that I am going to use. (just to simplify I cut it a little longer then what I needed. I normaly dont cut it til after I sew it in place) You can measure how wide your elastic band is but this is ezer for me. I took a ruler an marked a little bigger then the elastic band. ( that is so there will be some room to pull it throw) Sew on your line. Dont forget to back stitch. I put the elastic band in to make sure it would fit ok. You do not have to put the elastic band it at this time. Next I set my sewing machine to its longest stitch. Next pull out about 6 inches of thread in the machine ( spool and bobbin ) Next stitch a line end to end. ( Do NOt Back Stitch) leave it long as well. Sew a line 1/4 of an inch over and repeat with leaveing the threads long. { if you got all that then take a brake and have a cookie } Now comes a fun part. Set your sewing machine to a zig zag stitch. ( one that is about the with of your elastic band ) Start about 1/4 of an inch in and back stitch to the starting point of your cloth. ( Make sure the needle is all the way down ) Ok now you are ready to start. Hold the end away from you in one hand and the elastic band in the other. Now the end closest to you pull it and start sewing on the elastic band. Use your other hand at the back to litely put is throw the machine. The maching will do most of the work for you. Dont forget to back stitch at the end. { you can pull it a good bite so do not worry about brakeing it } Should look something like this when it is done. You can now cut the elastic band at the ends. Time to gather the other side. This is just me but I tie one set of end together. Hold the bobbin threads (the blue threads) in one hand and pull the cloth on the threads.( it will not move far but if you keep working it down it will start to gather. ) Gather it till it is the lenth of your blouse front. You may want to even your gather at this time. Place good side to good side ( gather at the edge ) You can cut some of the thread if it is getting in the way. Sew a line between your two gathing stitches. Now you can remove the gathering stitches if you want or just cut the threads. YOu can make that call. Ok kids where about there. Finsh sewing the end of the blouse bust. I like to use velcro to hold the back together. It gives you some play if you where off a bit. Me: Ok we are all done. Time to try it on. Emily can you come here please. Emily: Ok I am on my way. Me: I need you to try this on for me. Emily: Ok. Emily: Well how does it look. Me: It looks fine. But does it fit right. Emily: It fits just fine. You are geting better at makeing it. Lucy: Well what do we have here. Are you geting a new outfit again Emily. Emily: No Lucy. Its not like that. I'm sorry. Me: Emily there is no need to be sorry. You where doing something for me. Lucy just has a chip on her shoulder. Emily: Ok. Lucy: What ever. Share this post Link to post Share on other sites
LoveAngel Posted December 24, 2011 Great explanation. By the way, Lucy's dress is fabulous. Wordpress - Twitter - Facebook Proud mother of Yukino-chan, Aoi-chan, Ms. Mariko and Millhiore F. Biscotti. Waiting for : $$$ Wishlist : Miku Hatsune costume Share this post Link to post Share on other sites
PrettyCranium Posted December 24, 2011 Thank you, thank you! This is exactly what I needed. I will be trying this soon. Also, I love the red dress -- pattern for that? Share this post Link to post Share on other sites
PrettyCranium Posted December 25, 2011 Okay, guys, update time. I tried the blouse again yesterday, and it caming out looking good. Unfortunately, when I tried it on my DD, it doesn't fit! The bust part is too small -- it barely covers her nipples if the seam is right under her breasts. The back parts are too small as well, so it cannot close up at the back. I'm thinking that I might have made my seams too wide. Jadepixel said in her notes that she left 1 cm, but it turns out too small for me. I particularly don't know why the bust part turned out smaller for me since I followed Fenrir's tutorial exactly (great tutorial, it worked brilliantly). The simplest solution might be to print out the pattern slightly bigger. However, I feel like the front of the blouse was the right size width-wise, but needed to be shorter height-wise. The backs needed to be wider. The other option is just using the one I made to adjust the pattern Jadepixel provided to something that works on my dolls, but that's harder. Also, my material frays like a bugger. I need a serger! It kind of bothers me that we all have the same DDs, the pattern worked for Fenrir, but not for me! On the plus side, I learned A LOT from sewing this piece, especially with the elastic and gathering. Like I said, the blouse actually looks great, just doesn't fit right. I am going to try again until I get it right! Thank you guys for your help. Share this post Link to post Share on other sites
fenrir z78 Posted December 25, 2011 The bust part is too small -- it barely covers her nipples if the seam is right under her breasts. The back parts are too small as well, so it cannot close up at the back. Does it look like this. this is ware the nipple is on the one I sewed. What I have had to do was pull the top part together first. The elastic makes it look and feel small. here is what it looks like after you pull it. Now I know it does not look like something you buy at the store. But I am ok with it. ( it cost me about $3 to make and I can make about 3 more if I want. To where I could of spent $65 and got one something online. What do you think was the better deal. ) Anyways. This is why I used velcro. It gives you some play to work with. { I sew my seams a little bigger then 1 cm. } This is just me but no one is goingto be looking at her back and the dress and her hair is going to cover it anyways. The simplest solution might be to print out the pattern slightly bigger. However, I feel like the front of the blouse was the right size width-wise, but needed to be shorter height-wise. The backs needed to be wider. If you made the dress in a darker color the blouse is acting like a liner to protect her from staining. As for the back leave it a little longer. Here is an example. I know me handwriteing looks like chickscrach. Just trace the pattern like normal but when it is time to cut leave the side that is going to be open to the back longer. You can alway make it smaller later if you need to. ( note I did this on paper but it gets the point throw) That should take care of the back problem. Also, my material frays like a bugger. I need a serger! There is a glue called fry stop. You can use that. Here is a link on how to sew a finshed edge without a serger. Both should work fine. It kind of bothers me that we all have the same DDs, the pattern worked for Fenrir, but not for me! On the plus side, I learned A LOT from sewing this piece, especially with the elastic and gathering. Like I said, the blouse actually looks great, just doesn't fit right. I am going to try again until I get it right! Thats the way to do it. Keep trying till you nail that sucker. Just rember to have fun doing it. You get a deffrent feeling about the clothing your girl is whearing. You feel more proud of her outfit. Unlike something you just buy online. I think everyone should try makeing an outfit at least once. ( Dont say " I dont have the skills to do that. " , " It looks hard. " or " I just cant do that. " Look at how much money you spend on buying outfits. You can take basic sewing class. The worse thing that can happen is you learn something useful. Share this post Link to post Share on other sites
PrettyCranium Posted December 26, 2011 Thanks Fenrir! My blouse looks like yours on the back. I'm going to try again with longer (wider) back sections and perhaps a bigger bust peice (or smaller seam allowances). I'm reassured by your pictures that I'm doing the right thing. As for Fray Stop, I find it makes the fabric really crusty. I have a bottle of it somewhere, I will give it a try and see how I like it. Share this post Link to post Share on other sites
fenrir z78 Posted December 26, 2011 Thanks Fenrir! My blouse looks like yours on the back. I'm going to try again with longer (wider) back sections and perhaps a bigger bust peice (or smaller seam allowances). I'm reassured by your pictures that I'm doing the right thing. As for Fray Stop, I find it makes the fabric really crusty. I have a bottle of it somewhere, I will give it a try and see how I like it. I know what you mean. Fray stop is one of those thing I try not useing if I can. A serger is the best way to go. But they cost sooooo much. It may be something I plan on geting at the frst of the year. Share this post Link to post Share on other sites