luciole Posted July 16, 2017 Hi! I want to know if it's possible to put a small bust for DDIII on a DDII body? Because on the Volks website the only bust parts available are for DDIII or DDS. Thanks for any help. Share this post Link to post Share on other sites
baldylox Posted July 17, 2017 It will work but you'll probably have to trim out the inner shoulder pieces because the overall holes are smaller on the DD3 than the DD2. I mean these holes: Check this thread to see the other differences in the DD2 and DD3 bodies, especially the arm pegs. This is what I'm talking about as far as having to trim out these holes so the arms will fit properly. viewtopic.php?f=21&t=3791 Billy I gave up counting the girls I own, they keep multiplying and won't stop. Share this post Link to post Share on other sites
toughstermcg Posted July 17, 2017 DD3 bodies' inner torso has the inner armature that holds the armholes and neck peg as a very small apparatus, making it very easy to swap busts. The older DD2 has a wider like, flat plastic ribcage instead of the smaller DD3 one. You can fit a DD3 bust on this, I've done it with an SS bust before -- but it's a very tight fit! Definitely heat from a hairdryer to loosen the vinyl up and it's a bit frustrating even then. Share this post Link to post Share on other sites
luciole Posted July 18, 2017 Ok i see, humm not sure if i will try this... i'm a newbie with DD and a little bit afraid to mod a chest part. Thanks for all the answer! Share this post Link to post Share on other sites
