sugarsuites Posted April 1, 2019 Hi there! It was recommended to me to join here to ask this question, but I just recently got an mdd-f3 body in the mail for a head I have and it's incredibly floppy... and the screws are super tight already. I'm not sure how else I can make it so my girl doesn't fall backwards due to her thighs being so weak. Any suggestions? Would hot glue sueding help? Share this post Link to post Share on other sites
Mizuumi-no-Otome Posted April 2, 2019 Perhaps you could try using KIPS? I know they can be inserted into the skeleton somehow. 1 Share this post Link to post Share on other sites
BeyondTime Posted April 7, 2019 (edited) While I would not advocate overtightening if it is already at max tightness, I will note that very slight screw asjustments seem to get you a lot with the F3 frame. My Saber Altria looked like she was max tightened on her feet, but after I sanded the leg posts so her armored boots could fit on I was still able to turn the foot screws half a turn in order to adjust them to the newly sanded pegs. If you do try tightening her screws do it a little at a time, like maybe 1/8th of a turn and see what the effect is. If at any point the screw feels like it doesn’t want to move then stop immediately. Tighten just enough to stop the flop, you don’t want to impair mobility. Edited April 7, 2019 by BeyondTime The difference between Dollfie Dreams and Heroin? Heroin is illegal, Dollfie Dreams probably should be. “Empty wallets, full hearts.” That’s probably an apt description for the effects of DD addiction Share this post Link to post Share on other sites
foo Posted April 7, 2019 Volks has a guide about how to tighten joints on an f3 body, https://www.dollfiedream.tokyo/dd_en/support/ddf3/ 1 Share this post Link to post Share on other sites
Laylian Posted April 7, 2019 Also, make sure the joints are locked into place. Seems obvious, but mine had the hip joints just slightly out of alignment and kept flopping everywhere. Share this post Link to post Share on other sites
