Any pictures of Dollfie feet detached (all)

I'm trying to design some high-heel feet for the Dollfie Dream III
But I'm not brave enough to start pulling it completely out of the balljoint part. Has anyone a picture of the foot fully extracted what kind of hook they're using. I could try design the hull around the hook but I need to know anyway to keep the mobility of the joints.

I'm completely new to 3D so I guess it will take quite a while before and if I will even succeed. Right now I'm doing a color test because the regular stuff was too pink.

 

 

Perhaps the pictures in this article may help you. It is for DDII, but I do not know if the foot frame changed between that and DDIII:

https://fujiwarayukino.wordpress.com/2011/08/28/the-adventures-of-fujiwara-yukino-tutorial-01ddii-foot-replacement/

That is nice! Only I need to see that hook as well. So far I've drawn a cylinder and two spheres. Now I'm trying to figure out how to cut the sides of the hook and a valley into that other sphere where the hook goes into. 

I wish I remember the wrists better. It's some kind of tiny cylinder in there with rounded edges and that hook around it. But I don't know the angle that thing has.
A pretty poor movement if you ask me. The foot only goes one way and not very far.

Anyway, I hope to see more but this is nice. I didn't expect there would be a part inside the foot. Since on my resinprinter I will just print the ball onto the foot. In the worst case if I cannot design then I will try hot water and bend the foot if that works to keep the shape natural and on both sides.

 

Thnx any help on info is appreciated!

Spoiler

Anyways, here's a blog that shows the F3 foot parts, unscrewed and disassembled. The parts are little different, but I figured it might still be useful or something. The post is in Japanese, but the images are pretty clear on what to expect.

https://ameblo.jp/kotarovision/entry-12418001652.html

Edited October 7, 2019 by Subaru

6 minutes ago, Subaru said:

  Reveal hidden contents

Anyways, here's a blog that shows the F3 foot parts, unscrewed and disassembled. The post is in Japanese, but the images are pretty clear on what to expect.

https://ameblo.jp/kotarovision/entry-12418001652.html

Wow... magic. You have the stuff, only the F3 is much more complicated than I thought. But I will try to keep holding on. For now I am starting to download other STL balljoints and see if I can merge them with the foot and the hollowed out cylinder. I get very nervous but I must focus lol. 

I just need to learn this 3D designing stuff, looks so much harder than Photoshop.

Thank you so much!

Here's another alternative, a maker of third party DD option parts sells heeled foot parts. 

http://item.taobao.com/item.htm?spm=a1z10.1.w4004-1268090393.4.KWkrN7&id=13037390170

http://www.wersaze.com/

You will need to use a shopping service to get them though. 

You can find some pics on the forum here: 

 

And Archangeli's video here: 

-----

I took another look at the blog and they have pictures of the DDIII frame: 
https://ameblo.jp/kotarovision/entry-12356873601.html

Edited October 7, 2019 by Subaru

23 minutes ago, Subaru said:

Here's another alternative, a maker of third party DD option parts sells heeled foot parts. 

http://item.taobao.com/item.htm?spm=a1z10.1.w4004-1268090393.4.KWkrN7&id=13037390170

http://www.wersaze.com/

You will need to use a shopping service to get them though. 

And Archangeli's video here: 

I took another look at the blog and they have pictures of the DDIII frame: 
https://ameblo.jp/kotarovision/entry-12356873601.html

 

Ah yeah I remember those, they are the same seller. Just by the time I sent money I didn't hear anything so I went to investigate and he said the mold was broken. So I got refund.
But now that I have my own printer I want to try first myself.

I know that Youtuber as well, nice find. I will scroll through again if I see something. I can already see the wrist hook over there. Though they did not use that in the F3 that I have. (I have both the previous and the new F3 skeleton)

Great help. I will post pics if I manage to make something. I've got tons of props now  😄  but now comes all the priming and painting aarghhh