doll-mage Posted August 12, 2020 I'm going to show you how I made a boy Mini Dollfie Dream body using Obitsu torso parts! Required parts: Volks MDD body in Semi-White Parabox/Obitsu 45cm male torso shell (upper and lower soft vinyl parts) in White Process: Remove the arms and legs from the MDD body. Detach the MDD upper torso skeleton part from the lower torso skeleton part. Remove the lower torso skeleton part through one of the leg holes in the vinyl MDD shell. Cut out a 2cm deep wedge on each side of the Obitsu male lower torso shell. Slide the MDD lower torso skeleton into the Obitsu shell from the top opening. The Obitsu/Parabox shell is really soft and flexible. Although the male upper body is wider than the MDD, it can be squished to allow the arms to sit securely in the sockets. The neck has a better range of movement, too! If you want to use an Obitsu/Parabox head on the MDD skeleton, make a stopper from EVA (craft) foam and slip it on the neck peg. Now you have a boy 45cm vinyl fashion doll! He will fit in regular MSD size clothing, and can use the 45cm stain-prevention bodysuit from Parabox. 6 1 |--+ Doll-Candy: shop +--|--+ Instagram +--|--+ tumblr +--| Share this post Link to post Share on other sites
Jezrah Posted August 12, 2020 You can also just use the Obitsu boy bust only, along with the normal MDD lower torso if you don't want to have him get taller. There's a slight difference in color, but it's not noticeable with clothes on. Share this post Link to post Share on other sites
doll-mage Posted August 13, 2020 9 hours ago, Jezrah said: You can also just use the Obitsu boy bust only, along with the normal MDD lower torso if you don't want to have him get taller. There's a slight difference in color, but it's not noticeable with clothes on. My version is the same height as the MDD. |--+ Doll-Candy: shop +--|--+ Instagram +--|--+ tumblr +--| Share this post Link to post Share on other sites
Jezrah Posted August 13, 2020 (edited) 16 minutes ago, doll-mage said: My version is the same height as the MDD. Oh, I see, that's what the 2cm wedge cutout did. That's good to know. So then it would just fall to personal preference, or which parts you have on hand and how much you wanted to spend. 😊 Edited August 13, 2020 by Jezrah Share this post Link to post Share on other sites
Amoretto Posted September 28, 2020 On 8/12/2020 at 9:42 AM, Jezrah said: You can also just use the Obitsu boy bust only, along with the normal MDD lower torso if you don't want to have him get taller. There's a slight difference in color, but it's not noticeable with clothes on. This is good to know, thanks! Thinking of making a boy and this may have just saved me a bit of cash. Share this post Link to post Share on other sites
