modification Newbie DDH Customization

Hello! I thought I’d make a new post of this so I can update it with new things. I’m learning how to customize DDH ^^. I will show what I’ve learned so far. Here is the first pass of my heat pen ^^. I decided to go with Hakko My Pen Alpha since most of the learning material was based on it, but I think any pen that can get a low enough temperature should work. I sanded down the provided nibs, I did most of the work with a sanded down “knife” nib but it didn’t work the best! I also made the shavings too thick. If the shavings are too thick they won’t melt well and layer thickly. It’s important to have the vinyl melt to incorporate without it burning. The window between melting and burning is a little small, but if you follow the directions that Tsutomu-senpai provides it’s very easy. I’m using a damaged practice head ^^.

Here is some cleanup done with the shaved down standard stylus nib and sandpaper. Some of the vinyl rubs off probably because it’s not adhered well. The shaved down stylus nib works a lot better! Tsutomu has some nibs you can buy, or you can buy and sand your own. 

But I’m happy with my first attempt^^. The vinyl is pretty forgiving. It traps color from dust or burning easily. One eye took a couple hours.

I still need to get a few things before I can make more professional looking mods.

Edited February 22 by lossychan

I did a little more practice today ^^. It’s actually very easy to sit down and start modding, with faceups it takes a lot of preparation ><.  There’s still a lot of thickness around the eyes and mouth, I think the best way is to insert eyes and build into the eyelid hole using them as a barrier. For the mouth it’s probably the best to cut it and then smooth with vinyl thinner without much additive modding to create a smooth effect ^^. I’m getting some smoothing materials (vinyl thinner, pen sander, heat pen nibs) so it should be a little smoother in the future. 

Today’s practice ^^. I decided to use one of the new heads since I bought 3 more. After I get some smoothing tools I think it could be useable ^^.

awesome!