Silicone Busts for DDS?

So, I've successfully put my Rise on a DDdy body with Peach Pai. However, I'm getting Mariko soon, and I'd eventually like to get her a silicone bust, too.

 

But... I don't want to switch her off the DDS body, and she's WS. I think it's cute that it's petite and I love her skintone. That's why I'm coming here to see if anyone knows of any companies making a silicone bust for the DDS girls? Or if Peach Pai will be releasing a DDS bust at all? I see they have options for DD girls (and of course DDdy), but due to size differences, I'd be worried about arm gaping and all unless someone has proof to the contrary.

 

^^ Thank you in advance for any possible help! I'm not in an immediate rush to acquire one. I'd just like to know what I should plan for.

Bumping this old post for another chance at some responses!

The DDS body has the same issues as the DD3 and DDdy3 bodies... there's no internal support on top of the internal frame piece in the upper torso so the Peach Pai can't be supported properly by it. I actually *just* bought an M+ PP bust for my Mamimi, a first version DDS body, and I tried it on her with limited success. The arm holes are WAY too big for the thinner DDS shoulders and the internal frame doesn't give the silicone chest any support at all.

 

I've seen people modify an S-bust off an MDD before to provide support for Peach Pai before so if you're feeling industrious or crafty, that might be the best way to make it work properly.

 

The only other thing you could do to make them work is to do what I did for my DDdy3 girl Manami here in this post:

 

viewtopic.php?f=31&t=13200

 

That shows how to get some 3D printed supports to help keep the PP a bit better supported. They worked well for the DDdy3 body and since the internal frame is the same on the DDS, it should be a good way to get PP on one.

 

Other than these two scenarios, I have no idea how to make PP work better on the newer bodies.

 

 

Billy

  baldylox said:

The DDS body has the same issues as the DD3 and DDdy3 bodies... there's no internal support on top of the internal frame piece in the upper torso so the Peach Pai can't be supported properly by it. I actually *just* bought an M+ PP bust for my Mamimi, a first version DDS body, and I tried it on her with limited success. The arm holes are WAY too big for the thinner DDS shoulders and the internal frame doesn't give the silicone chest any support at all.

 

 

Billy

 

So then.. If I want a short girl with the peach pai bust I'm pretty much out of luck?

 

Also, what is the difference look like between the DD2 and DD3 skeleton? Do you perhaps have any pictures or know where some are posted? I'm thinking maybe I might have to get crafty...

  Hustic said:

So then.. If I want a short girl with the peach pai bust I'm pretty much out of luck?

 

Nooooo..... you can get those pieces I used on my DDdy3 girl for her Peach Pai Plus ( shown in one of the links I gave you above ) because they worked out fine. Since the internal parts are the same for the DDS and the DDdy3, you can use those two 3D printed pieces. It's not perfect but it works. Also, you can modify either an S-bust MDD part or an internal frame part from an older DDdy or DD2 body. These are hard to find by themselves tho. But you do have options, don't give up!

 

  Quote

Also, what is the difference look like between the DD2 and DD3 skeleton? Do you perhaps have any pictures or know where some are posted? I'm thinking maybe I might have to get crafty...

 

Check this thread for lots of photos of the differences between a DD2 and DD3:

 

viewtopic.php?f=21&t=3791

 

Hopefully this helps you out a bit!

 

 

 

Billy

here's a good thread for information on Peach Pai busts as well viewtopic.php?f=26&t=4062