[NSFW] How to assemble a dollfie dream's body - tutorial

Earlier this year, I put together all the DD III pieces and now I can show you how I put the body together.

You'll need all these eight parts (#1 and #8 for your choice)

parts1 by blackra, on Flickr

 

all DD3 parts by blackra, on Flickr

 

if you cann't buy a DDIII-FO-01 / Feet you can use a DDS Parts DDS-FO-01 Feet.

DDS Option Parts DDS-BF-01 Upper Torso Internal Frame is the same for all DDIII/DDdyIII/DDS dolls

 

step#1 - Attaching the shins to the thighs

it's hard to do (( you can to heat the knee side of the thigh with a hair dryer to make the vinyl more pliable. Then push the armature from the top of the hip down to get it through the hole at the knee. Also the knees pieces are labelled L & R )

attaching legs by blackra, on Flickr

 

13-1 by blackra, on Flickr

 

dd legs by blackra, on Flickr

 

in the end, you should have something like this )

14 by blackra, on Flickr

 

step#2 - connecting feets

it's very easy. you need to simply insert them

 

08 by blackra, on Flickr

06 by blackra, on Flickr

 

step#3 - connecting the legs to the hip socket

I heated the vinyl at the top of the leg with a hair dryer to make it easier

09 by blackra, on Flickr

 

11 by blackra, on Flickr

 

10 by blackra, on Flickr

 

in the end, you should have something like this

12 by blackra, on Flickr

 

step#4 - attaching the torso frame

Slide the internal torso frame onto the peg with the neck joint bent towards the back

13 by blackra, on Flickr

 

step#5 - attaching the bust )

it's easy. Slide down the bust onto the internal torso frame. be carefull with neck joint

14 by blackra, on Flickr

 

step#6 - attaching arms

The arms aren't labelled L & R but it's easy to figure out which is which by bending the elbows. The elbows only bend in one direction – forward like a real arm – so you can orient the arms that way. Push them straight into the shoulder holes.

15 by blackra, on Flickr

 

15 by blackra, on Flickr

 

After all these steps the body is complete! You just have to put the head XD

 

ps:Sorry for my bad english ^_^

That is so cool, blackmercury! Thank you!

I hope this will be useful to someone in future

Excellent!

Wish I had this when assembling my DDS, what a pain that was!

Any chance you can add a note about which way hands attach? I get them upside down half the time so it may be helpful to others too ^_^;

jadepixel

I'm sorry, I did not understand a bit what you mean.

 

I just remembered that in the book that was included with Natsuki 2nd was the process of how to disassemble the doll. these official photos can be used for assembly)

01 by blackra, on Flickr

 

02 by blackra, on Flickr

 

03 by blackra, on Flickr

 

04 by blackra, on Flickr

 

05 by blackra, on Flickr

thank you for the guide blackmercury ^^ is so usefull ^^

Very informative.

 

 

lol NSFW arrhgh! my eyes!

Thank you for the helpful guide blackmercury!

 

Makes me feel more confident about assembling my first Dollfie

thanks a lot!

that might help me when i'll get my DDIII body ^o^

now im considering to do my own DD III body this summer ^^ but fisrt i need the money XD

Thank you! This helped a lot when I assembled my girl's body yesterday! She's still headless, unfortunately…

Thanks so much for this!!

What about DDII?

DDII come pre-assembled, so someone would have to take them apart in the first place to need to put them back together. I know Mitsuki has some pictures of their internal frame in a sticky at the top of this forum, so you should be able to get a general idea from that!

So internal bust frames don't come with individual bust sizes? That's so useful to know, thank you! ^3^

DDII come pre-assembled, so someone would have to take them apart in the first place to need to put them back together. I know Mitsuki has some pictures of their internal frame in a sticky at the top of this forum, so you should be able to get a general idea from that!

Thank you. ^^ I took mine apart and had trouble putting her back together.